Latest Products
Contact Us
- The 3rd floor, Building A, Baolai Mansion, Hechang Road, Luozu Community, Shiyan Sub-district, Bao'an District, Shenzhen City
- sales@hualinkrf.com
- +86-755-88896526
2.92 mm/ 2.4 mm Attenuators
Description: 2.92 mm male to 2.92 mm female fixed Attenuators, frequency up to 40 GHz, power rate 2 watts.
2.4mm male to 2.4mm female fixed Attenuators, frequency up to 50GHz, power rate to 2 watts.
● VSWR: 1.35 Max. at 40GHz (2.92 mm); 1.40 Max. at 50GHz (2.4 mm)
●Attenuators: 1 to 30dB
● Durability: ≥ 500 Cycles;
● Body Material: Stainless Steel
● Center Contact Material: Brass and Becu Gold Plated
Description
Introduction
Hualink offering 2 watts millimeter waves fixed attenuators with 2.92mm and 2.4 mm interface that operate to 50GHz which is highly reliable, cost effective and short delivery time. This type attenuator is bidirectional. There are used to reduce or step down the power level of a signal while maintaining the waveforms integrity.
Specification
Electrical | |
● Impedance: 50 Ω | ● Input Power: 2 Watts |
● Frequency Range: DC – 50 GHz | ● Peak Power: 20 Watts (5μs pulse width, 1% duty cycle) |
● VSWR: 1.40 Max @ 50 GHz | ● Input & Output: Bi-directional |
● Attenuation Range: 1 to 30dB @ 50 GHz | |
Mechanical | |
● Durability: ≥ 500 Cycles | ● Coupling Torque: 7-8 lb-in Recommended |
Environmental | |
● Temperature Range: -55 ℃ to +125 ℃ | |
Material & Finish | |
● Connector: Stainless Steel, Passivated | ● Female Center Contact: Beryllium Copper, Gold Plated |
● Male Center Contact: Brass, Gold Plated | |
Typical Performance Data (@ 25℃)
DUT: 2.4mm male to 2.4 female 2watts 3dB attenuator
Features and Benefits
● Attenuation Range: 3dB, 6dB, 10dB, 20dB, 30dB;
● Input Power: 2 watts; 5 watts, 10 watts available
● Operating Frequency of 50 GHz Max. 1.85mm attenuators up to 67GHz available
Applications
● Instrumentation
● Precision measurements
● characterization
● Production systems
FAQ
1. Hualink's 2.4mm Series connectors
2.4 mm series connectors have a working frequency up to 50 GHz and adopt a reliable threaded connection method. They are used in more stringent millimeter wave fields such as communications, precision testing, automobiles, satellites, radar, and radio astronomy. The dielectric adopts the air. The thread adopts metric spe M7×0.75 to avoid mismatching with SMA, 3.5 mm, 2.92 mm, SMK, K and other connectors. In order to protect the jack from damage, the outer conductor has been matched to more than 50% before the pin contacting the socket. The interface is compatible with 1.85 mm, V series connectors.
Due to the reliable structure, smaller size, excellent electrical performance, higher alignment, robustness and repeatability, the 2.4 series have pushed the development of millimeter wave connectors to a new level.
2. Can damage occur to high power attenuators if connected incorrectly?
Some of the high power attenuators from Hualink have an input and output connector. They are labeled as "unidirectional" (one way) attenuators. If they are connected incorrectly (high power applied to the output of the attenuator), the attenuator may be damaged. If the attenuator specification states the attenuator is "bidirectional" then one may connect either the input or output connectors of the attenuator to the device under test.
Packaging, Shipping
Hot Tags: 2.92 mm/ 2.4 mm attenuators, China, suppliers, customized, OEM, ODM, Flexible Armored Coax Test Cables, Semi-Flex Cable Assembly, SMA To N Type Low Loss Test Cables, SMA To SMA Adapters, SMA Edge Mount Connector Jack With 4 Legs, RF Connectors
You Might Also Like
