3.5 mm Armored Test Cables

Introduction

Hualink Armored cable assembly designed for test applications that depend on accurate, repeatable measurements, provide excellent mechanical durability and electrical performance. Our RF cable assemblies not only feature a rugged construction that prolongs service life, but they also offer high phase and amplitude stability for high-density and modular test applications at an affordable price. The series of products have even more excellent properties in environmental performance and they are resistant to water, salt spray corrosion, high temperature and ultraviolet.

Specification

Features and Benefits

● Excellent phase stable vs. temperature

● Excellent mechanical phase and amplitude stability

● Longer service life with durable construction that resists crushing, twisting and kinking

● Increased throughput and reduced downtime with durable and reliable performance

Applications

● 5G test and interconnection

● High speed digital test

● Automated test equipment

● Thermal vacuum chambers

● Nearfield scanners

● Wireless telecommunication module testing

● Electromagnetic compliance testing

● VAN Test Cable

Product details

Armored Test Cable Assemblies Family includes SMA, 3.5 mm, 2.92 mm, 2.4 mm, 1.85 mm series.

DUT: 3.5 mm male to 3.5 mm male cable assembly, Length = 48 inches

FAQ

1. Care and Handing Instruction of cable assembly

A recent study showed that globally more than 75% of microwave/RF cable assemblies are replaced frequently due to damage during installation or operation. Hualink cable assemblies of all types offer a long service life providing they are treated with the appropriate care and attention. Microwave cable assemblies are high precision system components and require proper handling in order to ensure that measured performance values are maintained. To achieve the maximum installed performance the following guidelines should be followed

■ Mating life assumes the use of a calibrated torque wrench, interfaces are clean and within mil specs limits.

■ Ensure that the surroundings are clean and free of dust, dirt and any other particles that could enter unsealed connector interfaces

■ Use protective caps to prevent contamination whenever connectors are unmated

■ Where interfaces are contaminated, particles can be removed with dry, oil-free compressed air. Please use eye-protection, Interfaces can be cleaned with dry cotton swabs. Do not us hard hand tools or solvents. Do not blow into interfaces or use normal compressed-air

■ Choose the installation routing using the largest bend radii possible Small bend radii may affect electrical performance. Exceeding the specified limits during the installation process could cause a permanent degradation

■ Assemblies should be fixed in place without excess pressure. The use of cable ties should be avoided where possible, as they can easily exert more force than this. If cable ties must be used then they should be as wide as possible and still allow movement of the cable. Avoid placing fixings at regular intervals

■ Examine interfaces for damage and/or contamination before mating

■ Discharge connectors before mating or ensure that they are connected to a suitable ground

■ When mating connectors with a screwed interface always hold the connector bodies and turn only the coupling nut. This avoids twisting the cable and ensures minimum wear on the connector pins

■ Do not exceed the specified torque

Packaging, Shipping

Hot Tags: 3.5 mm armored test cables, China, suppliers, customized, OEM, ODM, 110 GHz 1 mm Jack PCB Connector Edge Launch, SMA Female 2 Hole Panel Connector, Coax Attenuators, Type N RF Attenuator, 2.4 mm To 3.5 mm Adapters, 2.92 mm To 2.92 mm Cables