Latest Products
Contact Us
- The 3rd floor, Building A, Baolai Mansion, Hechang Road, Luozu Community, Shiyan Sub-district, Bao'an District, Shenzhen City
- sales@hualinkrf.com
- +86-755-88896526
SMP Plug Through Hole Connector
Description: SMP Plug (Limited Detent) Thru-Hole PCB Connector,
● VSWR: 1.30 Max @ 20 GHz
● Insertion Loss: ≤ 0.27 dB @ 20 GHz
● Durability: ≥ 300 Cycles
● Body Material: Brass
● Center Contact Material: C3604B
Description
Introduction
Hualink’s SMP male connector uses shield attachment of solder attachment for the contact.
Our male SMP PCB connector provides a minimum frequency of DC and a maximum frequency of 20 GHz.
SMP coaxial connectors are available as smooth bore, catchers mitt, limited detent and full detent versions
SMP connectors are mateable with GPO™ connectors.
Specification
Electrical | |
● Impedance: 50 Ω | ● Insulation Resistance: 3000 MΩ Min |
● Frequency Range: DC – 20 GHz | ● Dielectric Withstanding Voltage: 500 Vrms Min (Sea Level) |
● VSWR: 1.30 Max @ 20 GHz | ● Contact Resistance: ≤ 3 mΩ (Center Contact) |
● Insertion Loss: ≤ 0.27 dB @ 20 GHz | ≤ 2 mΩ (Outer Contact) |
Mechanical | |
● Mateable with GPO™ connectors | ● Center Contact Retention Force: 6 lbs Min |
● Durability: ≥ 300 Cycles | |
Environmental | |
● Temperature Range: -65 ℃ to +165 ℃ | |
Material & Finish | |
● Body: Brass, Gold Plated | ● Dielectric: Engineering Plastic, Natural |
● Center Contact: Beryllium Copper, Gold Plated | |
Features and Benefits
● Gold Plated Brass Contact
● Good Stability Design
● Operating Frequency of 20 GHz Max.
● Snap-on coupling
● Through-hole design for high-reliability products that require stronger connections between PCB layers, not only soldering on the surface of the board, which withstands more environmental stress.
Applications
● PCB Connections
● telecommunication
● High Speed Digital
● Test Board
● RF Switch
Outline Drawing
Products details
Related Products
Hualink PN | DESCRIPTION | Picture |
SMP-PL-P-FF-ST-TH0320-02 | SMP Male (Limited Detent) Thro-hole, PCB Connector with .020 PIN |
|
SMP-PL-P-FF-ST-TH0320-01 | SMP Male (Limited Detent) Thro-hole, PCB Connector with .020 PIN |
|
Packaging, Shipping
FAQ
1. DEFINITIONS
● Coplanar ground plane spacing = trace width + gap + gap. This is the distance from the inside edge of one top ground plane to the inside edge of the other top ground plane.
● Microstrip-to-coplanar transition = When using microstrip on a multilayer board or on a board where the microwave ground is not accessible, then a microstrip-to-coplanar transition should be used.
● Transition Block = The portion of the End Launch connector assembly where the high frequency signal transition from the coax connector onto the printed circuit board.
● Ground stitching = These are vias connecting the top ground planes with the substrate ground. The purpose of the vias is to ensure both coplanar ground planes stay at the same potential. The best placement of these is near the trace at a distance of ¼ wavelength of the highest frequency.
2. The type of transmission line will determine the connector style
● Cable Connector-Coaxial Cable, Twin Line
● Surface Mount Connector-Microstrip
● Edge Launch Connector-Microstrip, Stripline, Coplanar
● End Launch Connector-Microstrip, Coplanar
● Surface Launch Connector-Microstrip, Stripline, Coplanar
3. Power Handling Capability
There are 2 types of power handling (expressed in watts) that must be considered
● Average Power
Average Power - the input power to a cable/connector which will produce a maximum safe center conductor temperature under steady-state conditions when terminated with a matched load.
A safe center conductor temperature is one that will not melt the dielectric.
● Peak Power
Peak Power-is limited by the voltage rating of the connector. The peak power is determined by the equation V^2/Z where V=the peak voltage rating and Z is the characteristic impedance
Hot Tags: smp plug through hole connector, China, suppliers, customized, OEM, ODM, Type N Low Loss Flexible Coax Cables, 3 5 mm Jack Mixed Tech Connector 34 GHz, 2 4 mm RF Cable Assembly, K Jack Edge Mount RF Coaxial Connector, RF Connectors, 110 GHz W1 2 Hole Connector
You Might Also Like
