Home > Products > RF Connectors > 3.5 mm Connectors

Products

3.5 mm Jack Edge Mount Connector 4 Legs

Name: 3.5 mm Jack Edge Mount Connector 4 Legs
Brand: Hualink
SKU: 141263086

Description: 3.5 mm, Female, Straight, Edge Mount, PCB Connector (Brass), with .010" Pin (with Feet), Apply to Edge Mount PCB, Work to 34 GHz
● VSWR: 1.30 Max @ 34 GHz
● Insertion Loss: ≤ 0.35 dB @ 34 GHz
● Durability: ≥ 500 Cycles
● Body Material: Brass with Gold Plated
● Center Contact Material: Beryllium Copper with Gold Plated

Send Inquiry

Description

Introduction

Hualink 3.5 mm jack edge mount PCB connector is a high performance 3.5 mm Connector and provides a frequency from DC through 34 GHz. This is an improved version of 3.5 mm edge mount, which allows connector to install vertically as through hole types, because it has 4 legs vertical to PCB. Brass or Beryllium Copper with gold plating make sure it has good conductivity and good solderability which helps a lot to products’ stability and keep high quality when proceed mass production. Edge Mount is more convenient for layout, and 4 legs make connection more stable.

Specification

Electrical
● Impedance: 50 Ω	● Insulation Resistance: 5000 MΩ Min
● Frequency Range: DC – 34 GHz	● Dielectric Withstanding Voltage: 500 Vrms Min (Sea Level)
● VSWR: 1.30 Max @ 34 GHz	● Contact Resistance: ≤ 3 mΩ (Center Contact)
● Insertion Loss: ≤ 0.31 dB @ 34 GHz	≤ 2 mΩ (Outer Contact)
Mechanical
● Mateable with SMA, 2.92 mm, SMK, K Series	● Center Contact Retention Force: 6 lbs Min
● Durability: ≥ 500 Cycles	● Coupling Torque: 7-10 lb-in Recommended
Environmental
● Temperature Range: -55 ℃ to +85 ℃
Material & Finish
● Body: Brass, 10 μ" Gold	● Dielectric: Engineering Plastic, Natural
● Center Contact: Beryllium Copper, 30 μ" Gold

Features and Benefits

● Gold Plated Beryllium Copper Contact

● Reliable with 4 Legs

● Big Bandwidth: DC - 34 GHz

Applications

● Communication

● Aerospace

● Antenna

● EMC/EMI

Outline Drawing

FAQ

1. Some descriptions of mechanical structure, material, surface treatment

■ The mechanical structure, material, surface treatment on the connector performance and price has great influence. Mechanical structure determines the production efficiency and the use of materials, or materials.

■ The connectors commonly used are made of brass, bronze, copper, stainless steel, PTFE. Brass and bronze, the price is relatively low, low hardness, easy processing, and high production efficiency. Beryllium copper, stainless steel, high price, high hardness, good elasticity, but the process can.

■ RF connector for lower resistivity, excellent corrosion resistance oxidation resistance with precious metal plating, such as gold, silver, nickel, etc.. Especially small size effect on the performance of the center conductor requirements more stringent. As a result of these metal prices, the impact on prices is great, general manufacturer’s specifications in the book detailed description of plating thickness.

■ The user can according to the above factors combined with their own conditions of use, environment and reasonable cost performance good connector.

2. What do connectors connect?

a) One side is typically a standard interface that mates to another interface

b) The other side typically connects to a transmission line like a cable or PCB

c) Adapters connect one interface to another

Packaging, Shipping