Latest Products
Contact Us
- The 3rd floor, Building A, Baolai Mansion, Hechang Road, Luozu Community, Shiyan Sub-district, Bao'an District, Shenzhen City
- sales@hualinkrf.com
- +86-755-88896526
2.4 mm To 3.5 mm Adapters
Description: 2.4 mm to 3.5 mm, Adaptor (Stainless Steel), Work to 34 GHz
● VSWR: 1.25 Max @ 34 GHz
● Insertion Loss: ≤ 0.35 dB @ 34 GHz
● Durability: ≥ 500 Cycles;
● Body Material: Stainless Steel
● Center Contact Material: Beryllium Copper
Description
Introduction
This between series 2.4mm to 3.5mm adapter was developed for use to 34 GHz. It uses a Passivated Stainless Steel body and gold plated contact pin. It has low VSWR and low loss to use to 34GHz. 2.4mm to 3.5mm adapter is constructed with male gender on end 1 and female on end 2. Usually VNA ports or test cable assemblies are designed as 2.4 mm series, it's good to take this adaptor for interface transformation, then you can test SMA, 3.5 mm products directly after calibration.
Specification
Electrical | |
● Impedance: 50 Ω | ● Insulation Resistance: 5000 MΩ Min |
● Frequency Range: DC – 34 GHz | ● Dielectric Withstanding Voltage: 1000 Vrms Min (Sea Level) |
● VSWR: 1.25 Max @ 34 GHz | ● Contact Resistance: ≤ 3 mΩ (Center Contact) |
● Insertion Loss: ≤ 0.35 dB @ 26.5 GHz | ≤ 2 mΩ (Outer Contact) |
Mechanical | |
● 2.4 mm Mateable with 1.85 mm, V Series | ● Center Contact Retention Force: 6 lbs Min |
● 3.5 mm Mateable with SMA, 2.92 mm, SMK, K Series | ● Coupling Torque: 7-8 lb-in Recommended |
● Durability: ≥ 500 Cycles | |
Environmental | |
● Temperature Range: -55 ℃ to +85 ℃ | |
Material & Finish | |
● Body: Stainless Steel, Passivated | ● Dielectric: Engineering Plastic, Natural |
● Center Contact: Beryllium Copper, 30 μ" Gold | |
Typical Performance Data (@ 25℃)
DUT: 2.4mm female to 3.5mm female adaptor
Features and Benefits
● Excellent performance DC to 34 GHz
● Air Dielectric;
● Outer conductors engage and align before the center contacts engage preventing damage to the center contact
● Plug coupling nut extends beyond the male center contact, protecting the contact while not mated
Applications
● Test field
● Cable Assemblies
● PCB connectors
Related Products
Hualink PN | DESCRIPTION | Picture |
AST-24-P-35-P-HPP-W1 | 2.4 mm male to 3.5 mm male adaptor |
|
AST-24-P-35-S-HPP-W1 | 2.4 mm male to 3.5 mm female adaptor |
|
AST-24-S-35-P-HPP-W1 | 2.4 mm female to 3.5 mm male adaptor |
|
AST-24-S-35-S-HPP-W1 | 2.4 mm female to 3.5 mm female adaptor |
|
FAQ
1. Hualink 3.5 mm Connectors
3.5mm RF coaxial connectors have a working frequency up to 34GHz, The 3.5 mm connector is a pin and socket design developed for use as an instrument grade air dielectric connector. The design configuration allows the 3.5 mm connector to mate with both SMA and the 2.92 mm connector.
2. How to use an adaptor?
Adapters are used to make reliable transitions from one connector interface to another. They are typically used for test and measurement, between equipment mounted connectors and devices under test. Adapters are available in-series and between series. Push-on versions are also available with slide-on interface instead of screw-on allowing significant time saving. Hualink also provide quick adaptors. They provide increased test speed, higher test coverage and maximum through-put.
Packaging, Shipping
Hot Tags: 2.4 mm to 3.5 mm adapters, China, suppliers, customized, OEM, ODM, 1.85 mm To 1.85 mm Adapter, High Performance Durable Test Cables, SMA Female End Launch Connector RF, SMA Jack Through Hole RF Connector, V Jack Connector Vertical Launch 67 GHz, V Connector End Launch Low Profile 67 GHz
You Might Also Like
