Latest Products
Contact Us
- The 3rd floor, Building A, Baolai Mansion, Hechang Road, Luozu Community, Shiyan Sub-district, Bao'an District, Shenzhen City
- sales@hualinkrf.com
- +86-755-88896526
SMP Between Series Adapters
Description: 2.92 mm to SMP Straight, Through, Adaptor (SUS and Becu), Work to 40 GHz
● VSWR: 1.25 Max @ 40 GHz
● Insertion Loss: ≤ 0.38 dB @ 26.5 GHz
● Durability: ≥ 500 Cycles (Smooth Bore);
≥ 300 Cycles (Limited Detent);
≥ 100 Cycles (Full Detent)
● Body Material: Stainless Steel & Beryllium Copper
● Center Contact Material: Beryllium Copper
Description
Introduction
Hualink provides a full range of in-series and between - series high performance, high quality, precision adaptors, it performs very low VSWR and insertion loss. These 2.92mm to SMP adaptors are designed in very stringent tolerances, manufactured following strict procedures, and checked completely. Heat treated gold plated beryllium coppers center pin and body ensure that adaptors have better "anti-corrosion", "wear-resisting" to reach more mating/unmating cycles. And SMP push-pull design allows it to connect or disconnect quickly, SMP small size allow it to use in small space, floating interface design allows it can be used in blind.
Specification
Electrical | |
● Impedance: 50 Ω | ● Insulation Resistance: 5000 MΩ Min |
● Frequency Range: DC – 40 GHz | ● Dielectric Withstanding Voltage: 500 Vrms Min (Sea Level) |
● VSWR: 1.25 Max @ 40 GHz | ● Contact Resistance: ≤ 3 mΩ (Center Contact) |
● Insertion Loss: ≤ 0.31 dB @ 40 GHz | ≤ 2 mΩ (Outer Contact) |
Mechanical | |
● 2.92 mm Mateable with SMA, 3.5 mm Series | ● Center Contact Retention Force: 6 lbs Min |
● SMP Mateable with GPOTM Series | ● Coupling Torque: 7-8 lb-in Recommended (3.5 mm) |
● Durability: ≥ 500 Cycles (2.92 mm) | ● Mating / Unmating Force: 10 lbs Max / 2 lbs Min (SMP Limited Detent) |
≥300 Cycles (SMP Limited Detent) | |
Environmental | |
● Temperature Range: -55 ℃ to +165 ℃ | |
Material & Finish | |
● Body: Brass, Gold Plated or Stainless Steel, Passivated | ● Dielectric: Engineering Plastic, Natural |
● Center Contact: Beryllium Copper, 30 μ" Gold | |
Typical Performance Data (@ 25℃)
DUT: 2.92mm female to SMP male adaptor + 2.92 mm male to SMP female adaptor
Features and Benefits
● Stainless Steel & Beryllium Copper for Long Mating-cycle Life
● SMP snap on Design
● Top quality
Applications
● Industrial
● Robert
● Test
Related Products
Hualink PN | DESCRIPTION | Picture |
AST-292-P-SMP-PL-HPP-W2 | 2.92 mm plug to SMP plug adaptor |
|
AST-292-P-SMP-S-HPH-W2 | 2.92 mm plug to SMP jack adaptor |
|
AST-292-S-SMP-PL-HPP-W2 | 2.92 mm female to SMP male adaptor |
|
AST-292-S-SMP-S-HPH-W2 | 2.92 mm female to SMP female adaptor |
|
FAQ
How much torque is recommended for a RF connector?
Connector Type | Recommended Coupling Torque |
SMA | 7 - 10 lb-in |
3.5 mm | 7 - 8 lb-in |
2.92 mm | 7 - 8 lb-in |
2.4 mm | 7 - 8 lb-in |
1.85 mm | 7 - 8 lb-in |
1.0 mm | 3.6 - 4.4 lb-in |
Type N | 12 - 15 lb-in |
Coupling Style of RF Connectors
Each interface has a coupling style to suit its application
■ Thread
Threaded results in the most robust connection for superior electrical performance. Thread style is characterized by connecting the most reliable, high mechanical strength, good vibration resistance. Due to the mechanical properties of electrical performance for better testing instruments, military aviation. Common thread connector has SMA, Type N, 2.92 mm (K connector), 2.4 mm, 1.85 mm (V Connector) 1.0 mm, 7/16, etc...
■ Bayonet
Bayonet type connector has characteristics as rotated 90 degrees locking, connection speed, and stability. It is suitable for frequent handling equipment, widely used in network systems, instrumentation, and other fields. The BNC series is a typical bayonet connector.
■ Push on
Push on style is characterized by rapid connection and separation, small volume, lightweight. For the shell plate to plate connection, high-density mounting. Common type connector has SMB, MCX, MMCX, SMP(GPO), SMPM(GPPO, SSMP), QMA, 1.0/2.3 etc.
■ Snap-On offers easy and quick mating and de-mating
■ Snap-Lock offers easy mating with the additional mechanical security of a secondary lock
■ Push-On is used for testing or when other features in the application provide location
Packaging, Shipping
Hot Tags: smp between series adapters, China, suppliers, customized, OEM, ODM, 2.4 mm Connectors, SMA RF Low Loss Test Cables, SMA Jack Through Hole RF Connector, RF Connectors, SMP Between Series Adapters, In Series Adapters
You Might Also Like
