SMA To SMA Ultra-flex Test Cables

Introduction

Hualink offered different function of high performance RF/Microwave coaxial cable assemblies to suit various testing environment. Hualink RF/ microwave coaxial cable assembly series provides superior quality for reliable test and measurement of microwave and millimeter wave (mm wave) signals. The PUR jackets, this type provides the most flexible cables among those armor ones. Besides, it has the water-proof function for different applications.

The material of main body is stainless, finished in passivated; the material of center contacts is BeCu, finished in gold; the material of insulations is PTFE and high strength PEI. The material of cable is Silver plated copper clad steel, SPC braid and Blue PUR jacket.

Specification

Features and Benefits

● Mechanical phase and amplitude stability

● Tri-shielding construction

● Improved Flexibility

● Better than -90dB Isolation

● Smaller Diameter SMA is available

Applications

● Production test for small sized RF products

● exposed RF circuits with edge launch connectors

● RF test systems interconnects

● Replacement for OEM Test Port Cables

● Field RF Testing

Product Details

Hualink RF coaxial cable assembly LUR series products are designed for typical use, production, laboratory test and measurement, defense/military, aerial antenna towers, etc. which is ultra-flexible with excellent durability of bending.

FAQ

1. Care and Handing Instruction of cable assembly

Hualink cable assemblies of all types offer a long service life providing they are treated with the appropriate care and attention. Microwave cable assemblies are high precision system components and require proper handling in order to ensure that measured performance values are maintained. To achieve the maximum installed performance the following guidelines should be followed

■ Mating life assumes the use of a calibrated torque wrench, interfaces are clean and within mil specs limits.

■ Ensure that the surroundings are clean and free of dust, dirt and any other particles that could enter unsealed connector interfaces

■ Use protective caps to prevent contamination whenever connectors are unmated

■ Where interfaces are contaminated, particles can be removed with dry, oil-free compressed air. Please use eye-protection, Interfaces can be cleaned with dry cotton swabs. Do not us hard hand tools or solvents. Do not blow into interfaces or use normal compressed-air

■ Choose the installation routing using the largest bend radii possible Small bend radii may affect electrical performance. Exceeding the specified limits during the installation process could cause a permanent degradation

■ Assemblies should be fixed in place without excess pressure. The use of cable ties should be avoided where possible, as they can easily exert more force than this. If cable ties must be used then they should be as wide as possible and still allow movement of the cable. Avoid placing fixings at regular intervals

■ Examine interfaces for damage and/or contamination before mating

■ Discharge connectors before mating or ensure that they are connected to a suitable ground

■ When mating connectors with a screwed interface always hold the connector bodies and turn only the coupling nut. This avoids twisting the cable and ensures minimum wear on the connector pins

Packaging, Shipping

Hot Tags: sma to sma ultra-flex test cables, China, suppliers, customized, OEM, ODM, 2.92 mm/ 2.4 mm Attenuators, K Jack Connector Vertical Launch, Vertical Launch 1 mm, SMA To Type N Adapters, 2.4 mm To 2.4 mm Cables, 3.5 mm Armored Test Cables