Latest Products
Contact Us
- The 3rd floor, Building A, Baolai Mansion, Hechang Road, Luozu Community, Shiyan Sub-district, Bao'an District, Shenzhen City
- sales@hualinkrf.com
- +86-755-88896526
SMA Cables LMR-100
Description: SMA (Male, Straight) to SMA (Male, Straight/ Right Angle), Ultra Flexible, Cable Assembly, operate to 6 GHz; Using Amphenol Times LMR 100A coax cable
● Impedance: 50 ohms
● VSWR: 1.30 Max @ 6 GHz
● Insertion Loss: 2.2 dB per Meter at 6 GHz
● Durability: ≥ 500 Cycles
● Connector Body Material: Brass, Gold Plated
● Center Contact Material: Brass, Gold Plated
Description
Introduction
This series cables are industry standard in high performance broadband, flexible, low loss 50 Ohm coaxial cables. It has a stranded center conductor and rubber outer jacket designed for multiple bending/flexing cycles. It is used for indoor applications.
Specification
Electrical | |
● Impedance: 50 Ω | ● Insulation Resistance: 1000 MΩ Min |
● Frequency Range: DC –6 GHz | ● Dielectric Withstanding Voltage: 500 Vrms Min (Sea Level) |
● VSWR: 1.30 Max @ 6 GHz | ● Time Delay: 1.54 ns/m |
● Insertion Loss: ≤ 2.2 dB @ 6GHz | ● Inductance: 0.077 uH/m |
Mechanical | |
● Durability: ≥ 500 Cycles | ● Coupling Torque: 7-10 lb-in Recommended |
● Installation Bend Radius: 6.4 mm | ● Repeated Bend Radius: 25.4 mm |
Environmental | |
● Temperature Range: -40 ℃ to +85 ℃ | |
Material & Finish | |
● Cable Jacket: TPE Black | ● Body: Brass, Gold Plated (Both Ends) |
● Features: Super Flexible | |
Features and Benefits
● 100% effective shielding
● Shielding Effectiveness: 90dB Min.
● Available as pre-terminated assemblies
● Ultra flexible
Applications
● Drop-in Replacement for RG-316/RG-174 (uses standard connectors)
● Jumper Assemblies in Wireless Communications Systems
● Short Antenna Feeder runs
● Any application (e.g. WLL, GPS, LMR, WLAN, WISP, WiMax,
● SCADA, Mobile Antennas) requiring an easily routed,
● Low loss RF cable
● Automatic test
Product Details
Hualink RF coaxial cable assembly products are designed for typical use, production, laboratory test and measurement, defense/military, aerial antenna towers, etc.
FAQ
1. What is a Connector?
A connector is a device used to connect to cables or other devices through which electromagnetic energy is transferred from one place to another.
● Creates many impedance variations or discontinuities in a very short distance
● Reflections are important, Attenuation not as important
2. What is the transmission line?
A transmission line is a conduit by which electromagnetic energy is transferred from one place to another
Coaxial Cable- Unbalanced Line: Center conductor surrounded by a concentric dielectric and outer conductor-Most popular type of transmission line
Waveguide: Rectangular, Circular
Planar Transmission Line: Microstrip, Stripline, Coplanar waveguide are most common
Twin Line- balanced line: two parallel conductors separated by a dielectric
3. Passive Intermodulation Distortion
● Spurious Signals created by non-linear mixing of 2 or more frequencies in a passive device
FIM3 = 2* F1-F2
● dBm: measure of power relative to 1 milliwatt
● dBc: measure of dB below a specified carrier level
Packaging, Shipping
Hot Tags: sma cables lmr-100, China, suppliers, customized, OEM, ODM, 3.5 mm Female 2 Hole Flange Connector, 2.92 To 2.92 Ultra-flex Test Cables, High Performance Durable Test Cables, RF Connectors, Cable Assembly, SMA Jack Edge Mount RF Connector
You Might Also Like
