Contact Us
- The 3rd floor, Building A, Baolai Mansion, Hechang Road, Luozu Community, Shiyan Sub-district, Bao'an District, Shenzhen City
- sales@hualinkrf.com
- +86-755-88896526
Semi-rigid Cable Assembly
Description: 1.85 (Male, Straight) to 1.85 (Feale, Bulkhead), Semi-rigid, Cable Assembly, operate to 67 GHz;
● Impedance: 50 ohms
● VSWR: 1.35 Max @ 67 GHz
● Insertion Loss: 6.02 dB per Meter at 67 GHz
● Durability: ≥ 500 Cycles
● Connector Body Material: SUS, Passivated
● Center Contact Material: Becu or Brass, Gold plated
Description
Introduction
The semi-rigid cables are unique in that it is easily bent to finished shape and still maintains its set after bending. This series cables provide an advanced low-density PTFE wrapped dielectric to replace traditional solid PTFE dielectric. This series cables can effectively reduce the attenuation by 30% vs. standard semi-rigid cable. The semi-rigid cables provide greatly extended environment parameters.
Specification
Electrical | |
● Impedance: 50 Ω | ● Insulation Resistance: 1000 MΩ Min |
● Frequency Range: DC –67 GHz | ● Dielectric Withstanding Voltage: 500 Vrms Min (Sea Level) |
● VSWR: 1.30 Max @ 67 GHz | ● Velocity of Propagation: 76% |
● Insertion Loss: ≤ 6.02 dB @ 67GHz | ● Shielding Effectiveness: 165 dB |
Mechanical | |
● Durability: ≥ 500 Cycles | ● Coupling Torque: 7- 8 lb-in Recommended |
● Min. Static Bend Radius: 9 mm | |
Environmental | |
● Temperature Range: -40 ℃ to +85 ℃ | |
Material & Finish | |
● Cable Outer Conductor: Tinned Copper Tube | ● Body: Stainless Steel, Passivated (Both Ends) |
● Features: Low Loss, Semi-rigid cable | |
Features and Benefits
● 100% effective shielding
● Shielding Effectiveness: 165dB Min.
● Wideband frequency coverage, DC-67 GHz
● Semi-rigid
Applications
● Cabinet jumper
● Interconnection between boards
● Missile System
● Feed network
● Base station equipment
● High frequency signal transmission
● Automatic test
● Waveguide antenna
Product Details
Hualink RF coaxial cable assembly products are designed for typical use, production, laboratory test and measurement, defense/military, aerial antenna towers, etc.

DUT: 1.85 mm male to 1.85 female bulkhead low loss semi-rigid cable assembly, length=600mm
FAQ
1. Hualink's 1 mm connector
The working frequency of 1 mm series can reach up to 110 GHz. They adopt reliable threaded connection methods and are applied in fields of communication, precision testing, automobiles, satellites, radar, radio astronomy and other ultra-high requirements millimeter wave fields. The dielectric adopts the air, and the thread adopts metric M4×0.7P. The design size is smaller than 1.85 mm, and it is currently the smallest millimeter wave connector in the world.
2. What's RF Coaxial Cable?
Cables can be an essential component, even a lifeline, to electronic systems. If a cable goes down, the entire system can fail.
With four critical factors impacting their performance — mechanical, electrical, environmental and application-specific — manufacturers have to make sure cables can survive severe conditions and perform reliably over the system's lifespan. Whether they’re used in systems operating on land, underground, in the ocean, air or space, cables must be built to last.
Coaxial cable is an electrical cable with inner conductor, dielectric insulator, shielding (Outer conductor) and jacket. Coaxial cable plays signal transmission role for Radio Frequency and normally will be terminated with RF connectors like SMA, 3.5mm, 2.92mm, 2.4mm, 1.85mm, 1mm, Type N, SMP, SMPM connectors to be RF coax cable assembly to connect modular and antenna.
The choice of Coax cable will affect frequency performance, flexibility, strength, attenuation, power capability and cost. Materials of inner structure decide coax cable’s performance.
Inner conductor might be solid or stranded. Solid will has lower loss, but stranded is more flexible. To get high frequency performance, the inner conductor may be silver plated. To cost down, the inner conductor may be copper clad steel. Inner conductor’s size plays an important factor to have lower loss. Bigger conductor will allow quick and smooth signal transmission, and is better choice for long length.
The insulator or dielectric wrap inner conductor, and may be solid plastic, a foam plastic or air with spacers. The common materials are PE, FEP, PTFE, and PFA.
Outer Conductor or Shielding can braided copper wire or braided alum wire or solid metal tube. To have better shield performance, some coax cables are designed to have double-layers wire braid or to have alum. Foil covered by one layer wire braid. The density of braided wire decides the shielding performance. Sometimes the braid is silver plated, tin plated or just bare copper.
Jacket can be made from many materials like PVC, FEP and PE. PE jacket can be used outdoor to have temperature resistance. PVC is more flexible and commonly is used indoor.
Packaging, Shipping

Hot Tags: semi-rigid cable assembly, China, suppliers, customized, OEM, ODM, High Speed Test Flexible Cable Assembly, 2.4 mm Female Connector End Launch, 2.4 mm Connectors, V Jack Edge Launch Connector, 3.5 mm To SMP Connector Adapters, 3.5 mm Jack RF Connector Vertical Launch 34 GHz
You Might Also Like













