In the field of connectors, RF coaxial connectors are a segmented category, while under the RF coaxial connector category, there are products related to RF coaxial cable connector components. What is an RF coaxial cable connector assembly and how its performance is affected, here are some of the basics of RF coaxial cable connector components.
Personnel engaged in the connector manufacturing industry, it must be clear that the RF coaxial connector cable assembly is composed of two RF coaxial connectors and a certain length of RF coaxial cable by welding, so RF coaxial cable has become an essential part of the RF coaxial cable connector assembly, its performance is directly linked to the performance of RF coaxial cable connector assembly.
After analysis, we have concluded that the performance factors of RF coaxial cable connector components are mainly the following 6 points, respectively:
First, the cyclicality of the station wave is not good;
Second, the performance caused by local deformation is poor;
Third, impedance mismatch (high, low or sudden high or low);
Fourth, the cable foaming layer and the outer conductor between the movement;
Fifth, the foaming layer pasted on the inner conductor, can not be cleaned;
Sixth, the size of the inner conductor does not meet the requirements;
The six points above are the main factors affecting the performance of RF coaxial cable connectors, so the quickest way to improve the performance of RF coaxial cable connector components is to reduce the above six failure modes. At the same time, the dimensions of the conductors in the connector assembly must meet the requirements. When we find the failure mode of RF coaxial cable connector assembly performance, we also find the direction to improve the performance of RF coaxial cable connector assembly, which has a high guiding significance for major manufacturers to improve RF coaxial cable performance.
