Latest Products
Contact Us
- The 3rd floor, Building A, Baolai Mansion, Hechang Road, Luozu Community, Shiyan Sub-district, Bao'an District, Shenzhen City
- sales@hualinkrf.com
- +86-755-88896526
K Female RF Connector End Launch
Description: 2.92 mm, Female, Straight, End Launch, PCB Connector, with .007" Pin (Solderless), Apply to End Launch PCB, Work to 40 GHz
● VSWR: 1.30 Max @ 40 GHz
● Insertion Loss: ≤ 0.38 dB @ 40 GHz
● Mating/unmating Life: ≥ 500 Cycles
● Body Material: Stainless Steel
● Housing Material: Brass
● Contact Pin Material: Becu
Description
Introduction
Hualink high-performance 2.92 mm female End Launch connectors are designed to provide less reflection up to 40 GHz for single-layer and multi-layer printed circuit boards where the high-frequency signal is on the top layer. It's designed into 2 pieces for more stable installation on PCB, solderless design for both grounding and signal make it high-efficiency to install or uninstall, which save a lot of time and cost. Comparing to Standard High Profile version, low profile is more suitable if application limit the space.
Specification
Electrical | |
● Impedance: 50 Ω | ● Insulation Resistance: 5000 MΩ Min |
● Frequency Range: DC – 40 GHz | ● Dielectric Withstanding Voltage: 500 Vrms Min (Sea Level) |
● VSWR: 1.30 Max @ 40 GHz | ● Contact Resistance: ≤ 3 mΩ (Center Contact) |
● Insertion Loss: ≤ 0.38 dB @ 40 GHz | ≤ 2 mΩ (Outer Contact) |
Mechanical | |
● Mateable with SMA, 3.5 mm, SMK, K Series | ● Center Contact Retention Force: 6 lbs Min |
● Durability: ≥ 500 Cycles | ● Coupling Torque: 7- 8 lb-in Recommended |
Environmental | |
● Temperature Range: -55 ℃ to +85 ℃ | |
Material & Finish | |
● Body: Brass and SUS303 | ● Dielectric: Engineering Plastic and PTFE, Natural |
● Center Contact: Beryllium Copper, 30 μ" Gold | |
Features and Benefits
● Good Return Loss
● Solderless /No hurting to the PCB
● Ship with testing report and can be tracked
● High Precision
● Excellent Repeatability
● Install easily
Applications
● Research & Development
● 5G Communications/Wireless
● EMC/EMI
● Systems and modules
● Electric measurement
Outline Drawing
FAQ
1. End Launch Connectors – Installation Procedure
Step 1: Mount the end launch connector on the board in the desired position through 2 holes.
Step 2: Ensure the launch pin is centered on the signal trace of PCB.
Step 3: Ensure the housing is tight against the side face of PCB.
Step 4: Tighten the 1-72 mounting screws until the connector is not moving.
Step 5: Keep PCB and Connectors clear
2. Cut-off frequency of RF connector?
3. How much torque is recommended for a RF connector?
Connector Type | Recommended Coupling Torque |
SMA | 7 - 10 lb-in |
3.5 mm | 7 - 8 lb-in |
2.92 mm | 7 - 8 lb-in |
2.4 mm | 7 - 8 lb-in |
1.85 mm | 7 - 8 lb-in |
1.0 mm | 3.6 - 4.4 lb-in |
Type N | 12 - 15 lb-in |
Packaging, Shipping
Hot Tags: k female rf connector end launch, China, suppliers, customized, OEM, ODM, V Jack 4 Hole Flange Mount Connector, 67 GHz RF Cables, SMA To SMP Cables, SMA PCB Edge Mount Female Connector, Phase Stable Super Low Loss Test Cables, SMA To SMA Bulkhead Adapter
You Might Also Like
