Sma connectors are one of the more common products in connectors, so if you're asked how the sma connectors are ended differently, you know? Questions about the different termination methods of SMA connectors Even if the same series of sma connectors, they will have different termination forms, mainly divided into wiring, pcb, panel three, respectively:
1. Wiring
Wiring and soldering wire and crimp connectors. Welding wire is the welding center conductor and cable shield. Crimp type is the crimp center conductor and cable shield, press efficiency is good performance. The weld line is stable and reliable. General flexible cable multi-use crimping type, semi-soft cable semi-steel cable multi-usable welding type.
2. PCB (printed circuit board)
When the connector is to be connected to the PCB, it is mostly a Through Hole or a patch type (SMT). For easy tin, the metal connected to the PCB is mostly gilded or tin plated.
3. Panel style
Panel connectors are mostly mounted on the enclosure, connecting internal and external devices. Flank is a drill mounting fix on the connector body panel. Another is to make screw teeth on the main body of the connector and secure them with screws. Such connectors often require waterproofing.
