Home > Products > Cable Assembly > Phase Stable Super Low Loss Test Cables

Products

2.4 mm RF Cable Assembly

Description: 2.4mm Male to 2.4mm Male or Female Test Cable using LFB24M1 Low Loss Ruggedized Flexible Cable / 2.6 mm OD, DC- 50 GHz Excellent Phase and Amplitude Stability vs. Flexure
● Impedance: 50 ohms
● VSWR: 1.30 Max @ 50 GHz
● Insertion Loss: 5.0 dB per Meter at 50GHz
● Durability: ≥ 500 Cycles
● Connector Body Material: Stainless Steel
● Center Contact Material: Brass, Gold Plated

Send Inquiry

Description

Introduction

The LFB24M1 Series Cable is a low loss cable that operates from DC to 50 GHz. This cable series is constructed with 2.4mm Male to 2.4mm Male or Female connectors. These cables are internally ruggedized with multi-layer copper spiral. They offer excellent phase and amplitude stability vs. flexure. This Series cables offer 1.30:1 max VSWR, propagation velocity is 74%. Accept small order and promise short lead time. If you need customize it, please contact us.

Specification

Electrical
● Impedance: 50 Ω	● Insulation Resistance: 1000 MΩ Min
● Frequency Range: DC – 50 GHz	● Dielectric Withstanding Voltage: 500 Vrms Min (Sea Level)
● VSWR: 1.30 Max @ 50GHz	● Nom. Capacitance: 81.5 pF/m
● Insertion Loss: ≤ 5.0 dB per meter@ 50 GHz	● Propagation Delay: 4.06 ns/m
Mechanical
● Durability: ≥ 500 Cycles	● Recommended mating torque: 7-8 lb-in (2.4mm)
● Phase Stability Over Flexure: +/- 7° at 50 GHz	● Insertion loss stability vs. bending: +/- 0.1dB at 50 GHz
Environmental
● Temperature Range: -55 ℃ to +85 ℃
Material & Finish
● Cable Jacket: FEP, Blue	● Stainless Steel passivated connectors
● Cable features: Phase stable and Flexible

Features and Benefits

● reliable, repeatable electrical performance with consistent phase and amplitude stability

● easy installation with flexible construction and small bend radius

● Extra low temperature-related phase change

● Light weight

● RoHS Compliant.

Applications

● test bench systems

● module-to-module interconnect

● clock distribution

● antenna arrays

Test Date and product details

DUT: 2.4 mm Male to 2.4mm male cable assembly, length= 10 inches

FAQ

1. The difference between quick connected and standard type cable.

In order to clarity clearer about the difference between quick connected and standard type cable. I've put them in the same picture following. Hope it helps a little.