Latest Products
Contact Us
- The 3rd floor, Building A, Baolai Mansion, Hechang Road, Luozu Community, Shiyan Sub-district, Bao'an District, Shenzhen City
- sales@hualinkrf.com
- +86-755-88896526
SMA To SMA Bulkhead Adapter
Description: SMA to SMA Bulkhead Adapters, Adaptor (SUS & Becu), Work to 26.5 GHz
● VSWR: 1.20 Max @ 26.5 GHz
● Insertion Loss: ≤ 0.31 dB @ 26.5 GHz
● Durability: ≥ 500 Cycles;
● Body Material: Stainless Steel
● Center Contact Material: Beryllium Copper
Description
Introduction
Hualink provides a full range of in-series and between - series high performance, high quality, precision adaptor, it performs very low VSWR and insertion loss. These 50 ohms SMA to SMA Bulkhead Waterproof adaptors are designed in very stringent tolerances, manufactured following strict procedures, and checked completely. Heat treated gold plated beryllium coppers center pin and body ensure that adaptors have better "anti-corrosion", "wear-resisting" to reach more mating/un-mating cycles, gasket design ensure it meets IP67 standard. It's widely used on test instrument or Box panel which requires sealing.
Specification
Electrical | |
● Impedance: 50 Ω | ● Insulation Resistance: 5000 MΩ Min |
● Frequency Range: DC – 26.5 GHz | ● Dielectric Withstanding Voltage: 1000 Vrms Min (Sea Level) |
● VSWR: 1.20 Max @ 26.5 GHz | ● Contact Resistance: ≤ 3 mΩ (Center Contact) |
● Insertion Loss: ≤ 0.31 dB @ 26.5 GHz | ≤ 2 mΩ (Outer Contact) |
Mechanical | |
● Mateable with 3.5 mm, 2.92 mm, SMK, K Series | ● Center Contact Retention Force: 6 lbs Min |
● Durability: ≥ 500 Cycles | ● Coupling Torque: 7-10 lb-in Recommended |
Environmental | |
● Temperature Range: -65 ℃ to +165 ℃ | |
Material & Finish | |
● Body: Stainless Steel, Passivated | ● Dielectric: Engineering Plastic, Natural |
● Center Contact: Beryllium Copper, 30 μ" Gold | |
Features and Benefits
● Stainless Steel & Beryllium Copper for Long Mating-cycle Life
● SMA thread Design
● Operating Frequency of 26.5 GHz Max.
● High Performance
Applications
● Instruments
● Measurement
● Point to Point or Rack to Rack Connections
Related Products
Hualink PN | DESCRIPTION | Picture |
ASB-SMA-P-SMA-S-HPP-W1 | SMA male to SMA female bulkhead adaptor |
|
ASB-SMA-S-SMA-S-HPP-W1 | SMA female to SMA female bulkhead waterproof adaptor |
|
ASB-SMA-S-SMA-S-HPP-W2 | SMA female to SMA female bulkhead adaptor |
|
ASB-SMA-S-SMA-S-HFF-W3 | SMA female to SMA female bulkhead waterproof adaptor |
|
FAQ
1. Power Handling Capability
There are 2 types of power handling (expressed in watts) that must be considered
■ Average Power
Average Power - the input power to a cable/connector which will produce a maximum safe center conductor temperature under steady-state conditions when terminated with a matched load.
A safe center conductor temperature is one that will not melt the dielectric.
■ Peak Power
Peak Power-is limited by the voltage rating of the connector. The peak power is determined by the equation V^2/Z where V=the peak voltage rating and Z is the characteristic impedance
Packaging, Shipping
Hot Tags: sma to sma bulkhead adapter, China, suppliers, customized, OEM, ODM, In Series Adapters, 2.4 mm Jack Edge Launch Connector 50 GHz, 67 GHz RF Cables, 2.4 mm Connectors, Vertical Launch 1 mm, 2.4 mm To 2.4 mm Cables
You Might Also Like
