How do you make the inner hole of the sma connector external screw, you know? Below, you will be told how to make the inner hole of the sma connector external screw so that you don't have to worry about this problem. Is the so-called, do-it-yourself, rich food and clothing, learn, no longer need to ask others how to make sma connectors.
Raw Material
Professional pressure wire pliers, electric iron, stripping pliers, tweezers, heat shrink tubes, coaxial cables
Steps
Prepare the wire. From left to right wire: domestic coaxial cable RG316, heat shrink tube, pressure line sleeve, SMA external screw inner hole female head, small needle.
First the heat shrink tube, pressure tube to cover the shielding line, peel off the shielding line outside the plastic cover, to ensure that the line length of 13mm, and then use tweezers to smooth the shield, shielding layer to leave the line 7mm, and finally peel off the insulation layer 3mm.
Put the needle on the SMA head, tin (tin not too much), can fix small needles and core lines can be. Then the SMA head, pressure tube cover, with pressure wire clamps to press the pressure tube well, and finally set the heat shrink tube, blow well with a wind gun.
